(0)
£0.00 (Inc.VAT)
British Sterling
FirePro Plus PU28 Fire Barrier (30 minute)

FirePro Plus PU28 Fire Barrier (30 minute)

by FirePro Pluscode: FP-PU28-30
  • Offers Available
  • Free UK Delivery when you spend £50.00
£282.00 (Inc.VAT) (FREE UK Delivery)
£282.00 (Ex.VAT)
£282.00 (Ex.VAT)
Minimum Order:
Item in Stock  |  Usually dispatched within 24 hours
Add to Bag
This product has been added to your basket...
  • Continue Shopping
  • Checkout

PU28 Fire Barrier is a 30 minute fire barrier, suitable for all building regulations.

PU28 30 Minute Fire Barrier can be used in most applications ranging from large building developments, timber framed constructions and scaffolding stairwells, to smaller applications from ceilings, floors, walls etc anywhere building regulations state that a 30 minute fire barrier is required.

Please note: This product is designed to contain the passage of smoke and flames. It will not insulate against the heat of a fire. If forming a cavity barrier or forming a fire barrier, please ensure that the product you use has the required insulation value. This note is for advisory purposes only and does not warrant any design characteristics. 

Please note: We would always recommend that you seek advice from your local Building Control Department or Fire Officer regarding the type of fire protection they require. This may involve the necessary level of protection and integrity and insulation values. We have specialists that can walk you through your project as every application varies. However, it remains down to the end user to determine suitability. 

IMO Approved Fabrics
Fully Certified Fabrics from FirePro against:
IMO MSC 307(88): Annex 1: Part 5 - Surface Flammability & Part 2 - Smoke and Toxicity

Finished Fabric
Weight: 250 g/m2
Thickness: 0.20mm
Useable width (standard) 1000mm
Roll Length: (standard) 50 mtr
Maximum operating temp. 550* 0C
Colour/Description: Silver/grey coating both sides

Base Fabric Construction
Weight: 200 g/m2
Weave pattern: Plain
Construction: Warp 17.2 per cm   Weft12 per cm
Yarn count:  Warp EC9 68 Tex   Weft EC9 68 Tex
Tensile strength:   Warp 386 N/cm   Weft 230 N/cm

Treatment/Coating Details
Weight:2 50 g/m2
25g/m2 of aluminium pigmented PU coated on each side

This cloth satisfies the requirements of clause 5 of BS 476: part 22 with a 30 minute fire rating, at which point the test was discontinued.
The PU coating is also an economical finish which stabilises the glass fibres, allowing for easier cutting/tailoring etc.

(please note this material is not suitable where insulation is a requirement)

Please contact us for our Delivery & Returns Policy

100% Secure